从一起氯气泄漏爆炸事故析氯碱化工事故的处置

通过对重庆天源化工总厂“4·16”氯气泄漏爆炸事故的处置过程的分析，认为建立一个统一的、科学的、协调的、高效的指挥体系是事故处置成功与否的关键，而且应妥善、科学的做好应急人员疏散工作，提出了对液氯生产事故处置程序的意见并分析了处置中应注意的问题。     

粮食粉尘爆炸灭火救援对策研究

粮食粉尘爆炸燃烧时间长,破坏力大,易发生中毒和人员伤亡。介绍了粮食粉尘爆炸形成的特点,分析了粮食粉尘爆炸的条件及控制措施,探讨了粮食粉尘爆炸灭火救援对策。     

水下接触爆炸下液舱前置型防雷舱的动响应分析

为探讨防雷舱结构设计,采用有限元方法对同一防雷舱结构的典型模式和液舱前置模式进行数值仿真计算,通过对典型模式与实验结果的对比,验证了数值计算方法的有效性。着重分析了液舱前置对防雷舱结构动响应过程、失效模式及防护效能的影响,并分析了其形成机制。从结构破坏过程、载荷特性、吸能特性三个方面对比了两种模式的差异,探讨了两种模式防雷舱结构的防护机理,为舰船水下舷侧防护结构的工程设计提供了参考。     

Deformation,fragmentation and acceleration of a controlled fragmentation charge casing

Two different finite element software, LS-DYNA and Impetus, have been evaluated to test their ability to predict the deformation, fragmentation and acceleration of a controlled fragmentation charge casing. The general-purpose program LS-DYNA was used with a multi-material ALE formulation and a mass-preserving erosion criterion coupled to a Johnson-Cook fracture criterion. In the Impetus simulations, a third order Lagrangian element formulation was used for the casing and a node-splitting element erosion treatment coupled to a Cockcroft-Latham failure criterion was used to describe casing fracture. The high-explosive gases were described by a discrete particle formalism.In order to acquire data to validate our computational tools and constitutive models, a series of experiments have been performed using a laboratory charge with an internal grooved casing. In the test series, the charge geometry was fixed except that the groove depth were varied from very shallow to very deep resulting in different deformation patterns, fracture modes and terminal velocities. Various diagnostic tools captured the different stages of the expansion and fragmentation of the casing. A high-speed framing camera depicted the deformation pattern before fragmentation and was used to determine the moment when the casing failed. Three different complementary techniques were used to follow the acceleration of the fragments; a Photon Doppler velocimetry to determine the initial acceleration of the casing, double exposed radiographs to estimate the fragment velocity after break-up and a high-speed video to determine the terminal velocity of the fragment after leaving the fireball. In addition, the fragments were soft recovered in a set of sawdust pit tests and their final shape and weight were measured. A SEM was used to characterise the fracture surfaces and to determine the modus of fracture (tensile or shear failure).Comparisons to experiments show that both software can predict the change in deformation behaviour when the groove depth increases, from tangential necking for shallow grooves to radial punching for deep groves. Both software could also reasonable well predict the acceleration of the fragments, though both overestimates the terminal velocity for the charge with the deepest grooves.     

某石化公司6·28爆炸火灾事故原因认定

通过介绍一起石油化工装置爆炸火灾原因调查案例，阐述了运用现场勘验、调查访问、技术测试、逻辑分析等方法，认定装置爆炸火灾原因的过程。     

恐怖性爆炸犯罪防范对策初探

近年来,国内外恐怖组织不断实施恐怖性爆炸犯罪,给世界各国造成了巨大的生命和财产损失。恐怖性爆炸犯罪主要有自杀性恐怖爆炸犯罪、交通工具上的恐怖性爆炸犯罪、特定建筑物的恐怖性爆炸犯罪、制造混乱的恐怖性爆炸犯罪等几种类型。防范爆炸性犯罪的主要措施有：加大反恐立法、加强国际合作、严格安检制度、强化基础建设、落实新闻管控和和谐民族关系等。     

非接触空爆对舰艇结构的破坏作用分析

基于非接触空爆理论,对作用于船体结构的载荷进行了分析,并将船体结构简化为板架模型进行了破坏作用的数值计算,计算结果与实际情况相符.     

从吉化双苯厂爆炸事故处置解读化工火灾扑救对策

吉化双苯厂“11.13”爆炸火灾事故是一起典型的化工类火灾事故,造成了严重的财产损失和人员伤亡。这起火灾爆炸事故具有爆炸、燃烧速度快、立体式燃烧、过火面积大、危害性大等特点,总结了这起事故处置经验,给出了准确判断,科学决策;快攻近战;统一指挥,协同作战;多种措施相结合;冷却防爆,堵截蔓延;隐蔽抵近,适时出击等处置化工类火灾的对策。     

一起管道燃气火灾爆炸事故爆炸点形成原因探讨

通过对一起居民住宅管道燃气泄漏火灾爆炸事故现场破坏程度的勘查,分析了在管道燃气泄漏后,由于燃气化学组分和理化性质的不同,室内环境因素影响扩散条件的不同,不同浓度的爆炸性混合气体在不同的部位出现了不同的形成过程,从理论上论证了管道燃气的泄漏点不一定就是中心爆炸点的火灾现场现象。     

垂直刚性面边界条件下水下爆炸气泡运动的理论研究

为研究垂直边界面对水下爆炸气泡脉动的影响,根据势流理论建立了垂直边界面条件下水下爆炸气泡运动的理论模型,编制计算程序进行求解。对水下爆炸气泡脉动运动的特点、流场的速度及压力的分布、气泡引起的载荷形式进行了分析,结果表明,此模型能够反映水下爆炸气泡和周围流体介质的运动规律,并能进行定量的计算。